Power Sources

 

Stay Powered

The Garmin Rino 75x continues to set the standard when it comes to integrated handheld GPSr power source versatility. Similar to the Oregon 7x0, the Rino 75x offers two integral battery options to keep your device powered during remote adventures:

• The Garmin Rino Li-ion battery pack can be charged by an external power supply without removing it from the device, allowing extended run time.
• For longer off grid trips, the Rino 75x can be powered by four AA batteries (requires optional AA battery pack), providing up to 18 hours of run time.

Charging the Battery

• The Rino 75x will continuously charge the installed Garmin Li-ion battery pack while an external power source is connected.
• The battery cover may feel warm to the touch during the charging process.
• Completely charging a fully depleted battery pack can require 10+ hours.

 

Maximizing Battery Life

Alkaline batteries loose a significant amount of their capacity as temperature decreases. Using lithium batteries is recommended when operating the Rino 75x in or near sub-zero temperatures. If not planning to use the Rino 75x for an extended period of time, store the device with the battery pack removed. Several options exist to help extend battery life:

• Exit the Camera application when not taking photos
• Turn the Backlight off when not absolutely needed
• Disable Radio when not in use
• Operate Radio at ½ Watt power when possible
• Set Touch Sensitivity to Normal
• Decrease Backlight Brightness
• Reduce Backlight Timeout
• Enable Battery Save Mode
• Disable Bluetooth
• Disable ANT+ Sensors
• Set Map Speed to Normal
• Disable the magnetic compass
• Disable GLONASS
• Disable WAAS/EGNOS
• Configure Altimeter - Pressure Trending for 'Save When Power On'
• Adjust Tracklog to 'Auto' or 'Off'
• Set Map Orientation to 'North Up' instead of 'Track Up'
• When permissible, use the Compass or Trip Computer while navigating, not the Map

Hot Swap

On occasion, you may encounter situations where your Rino 75x battery reserve is running low and you need to replace the batteries without rebooting the GPSr. For example, when [Setup > Altimeter > Pressure Trending > Save Always] is selected, the device displays "WARNING: Do not remove the batteries while this feature is active."

In these circumstances, a Hot Swap can be accomplished using any device with a powered USB port. On grid, this may be a home or laptop computer, the AC adapter that came with your Garmin Rino 7xx, or similar devices. Off grid, a portable computer or auxiliary power source designed to power/recharge USB enabled mobile devices should be sufficient (Our favorite off grid solutions).

Performing the Hot Swap is a quick and easy process:

• Connect external USB power source
• Allow the GPSr several seconds to register the external power source
• Carefully remove and replace the battery pack
• Ensure batteries are properly seated and oriented
• Remove external USB power source
• Select [Stay On] when prompted
• Check GPSr for proper function

Battery Display

• The Rino 75x battery icon provides information about the battery charge level, charging status, and current power source.
• Remaining battery capacity is updated dynamically based on current battery load conditions. A reduction of indicated battery capacity may be observed while using high current draw features.

Powered On

• The Rino 75x battery icon reports current power information in the Status Page, Status Dashboard, Status Widget, Status Menu, Application Drawer (Activity Mode), Small Data Field, and Large Data Field:

Standby Mode

• The Rino 7x0 can not charge the battery while powered off, but can be put into a 'standby mode' by pressing and holding the power button.
• Connected to an external USB power source and placed into 'standby mode', the Rino 7x0 will charge a Li-ion battery to full capacity:

Power Options

• Multiple options are available to help keep your Rino 75x running for as long as you are:

Garmin Li-ion Battery Pack
		Rechargeable Li-ion battery pack 2400mAh capacity Can provide up to 14 hours of use per charge Order Garmin Part Number 010-11599-10 Rino 75x will auto-configure System Battery Type
	=/=	=================================================================
Garmin AA Battery Pack
		Optional AA battery pack adapter Power your Rino 75x with 4x AA batteries Batteries are not charged while in device Order Garmin Part Number 010-11600-10
	=/=	=================================================================
Rechargeable NiMH
		Most environmentally responsible solution Multiple manufacturers and capacities available Can provide >25% additional runtime compared to Li-ion battery pack Amazon Basics or Panasonic eneloop pro are recommended For best results, choose LSD or Pre-Charged batteries Can provide up to 18 hours of use per charge Configure Setup > System > Battery Type for NiMH
Alkaline
		Most economical single use option Multiple manufacturers and capacities available Capacity is inversely proportional to the load applied For best results, reduce GPSr current consumption Can provide up to 18 hours of use Configure Setup > System > Battery Type for Alkaline
Lithium
		Provides the longest single use runtime Best solution for use in extreme temperatures Multiple manufacturers and capacities available For best results, choose 2000mAh or higher capacity Can provide up to 18 hours of use Configure Setup > System > Battery Type for Lithium
External AC
		AC USB Charger with International Adapter Set Included with the Rino 75x Order Garmin Part Number 10-11873-00
External DC
		DC Vehicle Power Cable Power your Garmin Rino 7xx from any 12v power outlet Includes 1.5 amp replaceable fuse Order Garmin Part Number 10-11872-00