|
|
|
|
|
|
|
|
|
Overview |
|
|
|
Part of the mariner-friendly 76-series handheld navigators, the
GPS 76 is WAAS-enabled for accuracy to within 3 meters and
features a large, crisp display and easy-to-use buttons. |
|
|
|
Use on Land or Water |
|
Don't worry about losing this GPS device in the drink. The GPS
76 floats in water, and it's waterproof (IPX7) to withstand the
accidental dunk or splash in the lake. Whether on water or land,
the GPS 76 can save up to 500 of your favorite places in memory
and create a straight-line route to your destination. |
|
|
|
Store Important Data |
|
The GPS 76 is preloaded with worldwide cities as well as marine
navigation aids, including lights, buoys, sound signals and day
beacons. If you're into boating, hunting or fishing, you can use
the 76's built-in celestial data, which includes tide
information, sunrise/sunset times and a hunting and fishing
calendar. |
|
|
|
GPS 76: Rugged handheld navigation for your
land and sea adventures |
|
|
|
|
|
Specifications |
|
|
|
Part Numbers |
010-00244-00, 010-00244-01 (International) |
|
Unit Dimensions |
2.7" x 6.2" x 1.2" (6.9 cm x 15.7 cm x 3.0 cm) |
|
Display Size |
1.6" x 2.2" (4.1 cm x 5.6 cm), 2.7" Diag (6.8 cm) |
|
Display Resolution |
180 x 240 |
|
Display Type |
High contrast FSTN, 4-level gray scale monochrome LCD |
|
Weight |
6.1 oz (173 g) without batteries |
|
Battery Type |
AA x 2 |
|
Battery Life |
16 hours (Battery Save Mode Enabled) |
|
Operating Temperature |
5° F to 158° F (-15° C to 70° C) |
|
Waterproof |
IPX7 |
|
Floats |
Yes |
|
Interface |
NMEA 0183 USB + Serial |
|
GPS Receiver |
WAAS enabled, 12 parallel channels |
|
GPS Antenna |
Patch |
|
External GPS Antenna |
Yes |
|
GPS Constellations |
GPS +
WAAS |
|
GPS Position
Accuracy (95%) |
< 15 meters (GPS), 3 meters (WAAS) |
|
GPS Velocity Accuracy |
0.05 meter / second steady state |
|
GPS Hot Start |
< 3 seconds |
|
GPS Warm Start |
< 15 seconds |
|
GPS Cold Start |
< 45 seconds |
|
GPS Update Rate |
1 / second, continuous |
|
Altimeter |
GPS |
|
Barometer |
No |
|
Compass |
GPS |
|
Routes |
50 |
|
Tracks |
10 |
|
Waypoints |
500 |
|
Outdoor GPS Games |
No |
|
Almanac Information |
Yes (Tides, Sun and Moon, Hunt and Fish) |
|
Area Calculation |
Yes |
|
Point-to-Point Navigation |
Yes |
|
On Road Navigation |
No |
|
MOB |
Yes |
|
TracBack |
Yes |
|
Trip Info |
Yes |
|
Track Log |
Yes (2,048 points per track) |
|
Internal Memory |
1 MB |
|
Expandable Memory |
No |
|
Pre Loaded POIs |
Yes (marine
point database) |
|
Can Add POIs |
Yes |
|
Pre Loaded Maps |
No |
|
Can
Add Maps |
No |
|
|
|
|
|
Documents |
|
|
|
GPS 76 Owners Manual |
|
Sailing Terminology |
|
An Introduction to using Garmin GPSr with paper maps |
|
|
|
|
|
Media |
|
|
|
13MAR01 - GPS 76 and GPSMAP 76 give mariners two great
navigation options with WAAS capabilities |
|
GPS 76 and GPSMAP 76 Introduction Video |
|
|
|
|
|
Update History |
|
|
|
Tip: When MapSource data is
loaded to this GPS unit, the preloaded Marine POI database is
erased. Please use this
Marine POI database file to restore original factory
installed map data. If MapSource data is currently loaded on the
GPS unit, it will be erased and replaced with this Marine POI
database. |
|
|
Rev A: 006-B0173-00 Rev B: 006-B0444-00 |
|
|
|
2.20 |
- French translation update.
|
|
|
|
2.10 |
- Fixed problem with changing elevation units. Users are
now able to change to meters without having to restart the
unit.
- New French translations.
|
|
|
|
2.09 |
- Eliminated possible shutoffs when repeatedly finding
Cities or Points of Interest.
- Eliminated possibly storing bad data when starting a
Goto, which would cause the unit to shut off and would
prevent the unit from turning on again.
- Eliminated possible lockups when deleting all user
waypoints.
- Added a Setup Routes item to the Routes main menu page
which allows setting the route waypoint transitions to
Manual. When set to Manual, routes will transition to the
next waypoint only when instructed to do so by the user.
- Added a Setup NMEA output item to the Interface setup
page menu when the Serial Data Format is set to NMEA. This
allows setting the following for the NMEA output: the
precision of the minutes field for lat/lon, the waypoint
identifier format, and which groups of sentences to
transmit. These settings allow compatibility with a wider
range of NMEA-driven products including some older marine
autopilots.
- Added receiving water depth through DBT NMEA input
sentence.
- Added Location (both chosen & default formats) as
choices for Medium and Large configurable fields.
- Added geocaching user waypoint symbols.
- Added more marine user waypoint symbols.
- Added new Point of Interest types when supported by the
map data.
- Allowed finding duplicate-named cities by name across
multiple maps of the same type if supported by the map data.
- Used depth (if it is being received through NMEA) when
marking a waypoint.
- Used depth (if it is being received through NMEA) and
altitude when creating the MOB waypoint.
- Display approaching waypoint messages longer when based
on distance.
- Reset the Arrival alarm when the Arrival alarm distance
is changed.
- Prevented possible corruption of time in GARMIN output
format.
- Output correct week number in NMEA output format when
operating through the end of a week.
- Added Croatian map datum.
- Changed Taiwan grid title from T67 to TM2.
- Removed displaying the hotel & motel reservation number
when reviewing exit services.
- Changed threshold so that values greater than 9999
meters are displayed as kilometers. Previously this
threshold was 999 meters.
- Improved the accuracy of the estimated accuracy value.
- Correctly turn Anchor Drag and Off Course alarms on and
off on Alarms setup page.
- Correctly display the Mode after restoring defaults on
the General setup page.
- Correctly display the map page when rapidly changing
pages.
- Allowed the backlight to be turned on while a
confirmation page is being displayed.
|
|
|
|
2.08 |
- Retain waypoint comments between power cycles.
- Changed the anchor drag alarm to sound every time the
boat moves outside the anchor area.
- Changed the anchor drag alarm setting distance units
from miles to feet.
- Display approaching waypoint messages longer when based
on distance.
- Eliminated possible lockups when saving a track back
through midnight or noon.
- Improved WAAS performance after long periods of shading
for both WAAS and GPS satellites.
- Improved WAAS performance when GEO ephemeris is
available but almanac has not yet been collected.
|
|
|
|
2.07 |
- Eliminated lockups at certain locations.
- Added waypoint comments. (When creating new waypoints,
the comment will initially contain the date and time the
waypoint was created.)
- Added Project Location option for waypoints.
- Added Append To Route option for waypoints to allow
appending of waypoints to new and existing routes.
- Added Toggling between displaying chosen & default
location formats on the GPS info page when a cursor key is
pressed.
- Added new Swedish RT 90 location format.
- Increased the breadth of waypoint symbols that can be
received through the serial port.
- Improved responsiveness of positioning in shaded
conditions.
- Added display of the north reference source to bearing
fields.
- Properly show times for tide stations with UTC offsets
greater than +/- 9 hours.
- Allowed for all 4 digits of mils to be shown on the map
feature review pages.
- Re-sort waypoint symbol selection list after changing
the language.
- Changed confirmation box buttons on proximity page from
OK & Cancel to Yes & No.
- Increased the number of copyrights that can be displayed
from 4 to 5.
- Correctly get all copyrights strings from map data.
- Made the size of the degree symbol consistent between
degree symbols with north reference indication (e.g. deg
true, deg mag) and those without.
- Changed 'Map Location' text to 'Map Pointer'.
- Map datums automatically associated with location
formats can no longer be changed.
- Changed Swedish and RT 90 location formats to have the
northing on top and easting below and to use 'X' and 'Y' to
indicate northing and easting instead of 'N' and 'O'.
- Improved the appearance of the pointer tail.
|
|
|
|
2.06 |
- Re-enabled highlighting of map features when panning on
the map.
|
|
|
|
2.05 |
- Eliminated possible lockups when using WAAS.
- Eliminated possible lockups when the unit detects low
batteries and attempts to shut off.
- Eliminated possible shutoffs when computing moon rise
and set times for extreme latitudes.
- Eliminated repeated resetting of reference when
measuring distance after the menu was exited with the ESC
key.
- Eliminated occasional blanks at the end of lists when
finding Points of Interest by name.
- Transfer more points to saved tracks when saving short
track logs.
- Changed display of distances to have 2 digits to the
right of the decimal point.
- Added support to display directions in mils.
- Changed anchor drag alarm tone to sound until the
message is cleared by the user.
- Always display airports when available in map data.
- Added support for diacritic characters in map data.
- Display 'inaccurate result' message if there is an error
calculating a tide.
- Completely removed transmission of Sonar sentence from
NMEA output.
- Used user-entered magnetic variation if north reference
is set to user when transmitting RMC and BOD NMEA sentences.
- Added indication of datum used by transmitting PGRMM
NMEA sentence.
- Smoothed positioning when operating in areas of heavy
shading when user has not entered an altitude.
- Changed name of existing Hu-Tzu-Shan datum to Taiwan.
- Added a new datum named Hu-Tzu-Shan which conforms to
the published Taiwan map datum definition.
- Improved the initial accuracy estimate.
- Replaced Danish language with Norwegian.
|
|
|
|
2.04 |
- Correctly determine the date the first time satellites
are acquired after the unit has been stored without
batteries.
|
|
|
|
2.03 |
- Correctly determined when and where the map should be
drawn.
- Ensured the maps are drawn after transferring maps from
MapSource to the unit, and when displaying the map page the
first time after turning the unit on.
- Only displayed maps that were not completely covered by
other maps.
- If only one map contained the points being searched for,
used it even if not selected by the user.
- Improved a few Swedish translations.
|
|
|
|
2.02 |
- Prevented scrambled screens when pressing the NAV key
twice.
- Prevented default Loran TD setup from being invalid.
- Allowed panning on map in all 8 directions on all units.
- Reported actual available size for maps to MapSource.
- Displayed tide station times using the daylight saving
time setting.
- Corrected display of tides for stations that have a tide
height bias.
- Stored saved track point locations so that they don't
move when being transferred back and forth between the unit
and a PC.
- Increased elevation display from 4 to 5 digits and
prevented it from switching to kilofeet or kilometers.
- Remembered highlight position in list when reviewing
waypoints on the route page.
- Added feature to compute the area enclosed by a saved
track.
- Allowed finding Manmade Places, Water Features, and Land
Features Points of Interest when available in map data.
- Controlled bearing line separately from other navigation
lines in map setup.
- Displayed GPS status on Pointer page and Highway page
when not navigating.
- Displayed services available at Fishing Hot Spots
facilities.
- Displayed TracBack points as 'BEGIN, TURN 1, TURN
2...END' instead of 'TURN, TURN...'.
- Reduced occurrences and improved handling of 'None
Found' messages when finding points.
- Stored map setup changes when exiting map setup instead
of when turning unit off.
- Added highlight timeout when panning on maps.
- Stored Normal or Battery Saver mode when selected after
Simulator mode.
- Allowed finding Exits.
- Stored all the track log points specified when saving a
track.
- Removed transmitting Sonar information on NMEA output.
|
|
|
|
|