Setup
Configure individual inReach MINI settings as
desired.
- Display Settings
- From the main menu, select Setup >
Display.
- Brightness: Adjust desired backlight
brightness.
- Timeout: Choose the amount of time
before the backlight turns off.
- Tracking Settings
- From the main menu, select Setup >
Tracking.
- Send Interval:
Sets the frequency at which the device records a track point and
transmits it over the satellite network when you are moving.
- Log Interval: Sets the frequency at
which the device logs your location and updates the track line in
memory.
- Auto Track: Sets the device to
start tracking when you turn on the device.
- Extended Tracking:
Sets the device to enter sleep mode between track points to maximize
battery life. Sleep mode disables Bluetooth wireless technology,
detailed track lines, and message checking.
- Stationary
Interval: Sets the frequency at which the device records a track
point and transmits it over the satellite network when you are not
moving. This setting is only available for professional customers with a
byte-based subscription plan.
- Burst Tracking:
When tracking, sets the device to create and send a detailed track line
to provide the best approximation of your location. You can select the
amount of data to use, and the device will create as many track points
as possible. This setting is only available for professional customers.
- Bluetooth Settings
- From the main menu, select Setup >
Bluetooth.
- Enabled:
Enables Bluetooth wireless technology.
- Pair Device: Connects your device
with a compatible Bluetooth enabled mobile device. This setting allows
you to use Bluetooth connected features using the Earthmate app.
- Forget Device:
Removes the connected device from the list of mobile devices to connect
to. This option is available only after the device has paired.
- Pair Again:
Restarts the pairing process. This option is available only after the
device has paired.
- ANT+ Sensor Settings
- From the main menu, select Setup >
ANT+.
- Enabled:
Turns ANT+ on or off.
- Messages Settings
- From the main menu, select Setup >
Messages.
- Ring Until Read:
Sets the device to ring until you read a new message. This feature is
helpful if you are in a noisy environment.
- Adaptive Mail Check: When this
setting is enabled, the device listens more frequently for a reply to a
sent message for ten minutes. If the recipient replies quickly, you can
receive the reply before the next scheduled listen interval. This
setting is only available for professional customers.
- Sounds Settings
- From the main menu, select Setup >
Sounds.
- Mute All:
Mutes all device tones.
- Volume:
Sets the device volume level.
- Message Received:
Sets the tone that sounds when you receive a message.
- Message Sent:
Sets the tone that sounds when the you send a message.
- Critical Alert:
Sets the tone that sounds when the device announces a critical alert.
- Power Off:
Sets the tone that sounds when you turn off the device.
- Time Settings
- From the main menu, select Setup >
Time.
- Time Format:
Sets the device to show time in a 12-hour or 24-hour format.
- Time Zone:
Sets the time zone for the device.
- Daylight Savings:
Sets the device to use daylight saving time. This option is not
available when Time Zone is set to Automatic.
- Units Settings
- Do not change the coordinate or map
datum formats unless you are using a map or chart that specifies a
different position format.
- From the main menu, select Setup >
Units.
- Coordinates: Sets the format used
for geographical position coordinates.
- Datum:
Sets the coordinate system used by the map.
- Speed/Distance: Sets the unit of
measure for distance.
- Temperature:
Sets the temperature units to Fahrenheit (°F) or Celsius (°C).
- Pressure:
Sets the pressure units.
- Bearing:
Sets the north reference used on the compass to true or magnetic north.
- Device Language Settings
- From the main menu, select Setup >
Language.
- External Power
- From the main menu, select Setup >
External Power.
- Auto Off: Determines if the inReach
MINI automatically powers off when external power is disconnected.
- Adding Owner Information
- From the main menu, select Setup >
Owner Info.
- Select OK, enter desired information, and
select
.
