BC 40
 
 
Overview 
Specifications
Documents
Media
Compatibility
 
 
 
Overview
 
Get a Clear View of What's Around You
The rugged BC 40 wireless camera mounts easily to your side-by-side or other off-road vehicle, so you can see terrain and obstacles on your compatible Garmin navigator’s display1.
  • Easily attach to your vehicle using the included mount, then pair with your navigator1.
  • No wires. Stream the camera view on your compatible Garmin navigator1.
  • BC 40 transmits a high-quality, wide video image up to 26'.
  • Use your voice, and tell your navigator1 when you want to see the camera view.
  • Mud and rain? No problem. BC 40 is weatherproof (IPX7) for tough conditions.
  • Two AA batteries (not included) keep BC 40 powered and ready for adventure.
 
Simple Installation
Install it quickly and easily - no drilling or wiring. Attach the mount to the tube frame, flat plate or roll cage of your vehicle, and snap the camera into place.
 
Works With Navigator
Wirelessly pair your BC 40 camera with a compatible Garmin navigator1 enabled with Wi-Fi connectivity to see the camera view on the navigator’s display.
 
Choose Your View
Versatile mounting options allow you to get the best view of your surroundings. What’s more, pair up to four BC 40 cameras (sold separately) to your Garmin navigator1 for increased awareness around your vehicle.
 
Battery Power
No need to wire BC 40 into your vehicle’s power. Just install 2 AA batteries (lithium recommended; not included), and you’re ready to go.
 
Clear Image
BC 40 transmits data up to 26' to provide a wide, clear image of what’s around your vehicle.
 
Voice Control
Use simple voice commands, such as “Show video,” to initiate the BC 40 camera view on your navigator1.
 
Built Tough
BC 40 is rugged and weatherproof (water-rated to IPX7) to withstand challenging terrain and weather.
 
1 Sold separately; see Compatible Devices tab.
 
Specifications
 
Part Number 010-01866-00 (License Plate Mount), 010-01866-12 (Tube Mount)
Dimensions 6.3" x 0.9" x 1.0" (15.9 cm x 2.2 cm x 2.5 cm)
Weight 2.1 oz (58.9 g)
Sensor CMOS
Resolution 1280 x 720 (0.9 MP)
Field of View 160°
Frame Rate up to 15 FPS
Can Flip Video Feed Yes
Night Vision No
Pair Multiple Cameras up to 4
Receiver / Transmitter Wi-Fi between GPS and Camera
Transmission Distance up to 26 feet
Wireless Frequency 2.4 GHz @ +13dBm nominal
Ingress Protection IPX7
Camera Operating Temperature -4° F to 158° F (-20° C to 70° C)
Power Supply 2 x AA (Lithium Recommended)
Battery Life 3 Months
 
Documents
 
BC 40 Wireless Backup Camera Owners Manual
 
Media
 
BC 40 - Wireless Backup Camera Introduction
 
BC 40 - Mounting Options + Adjusting Guidance Lines
 
BC 40 - Installation and Setup
 
BC 40 - Installation and Pairing with Tread
 
Compatibility
 
The BC 40 wireless backup camera is compatible with the devices listed below, provided the operating range between them does not exceed 26 feet (7.93 meters). This range can be further reduced by certain environmental factors.
  • Camper 770 / RV 770
  • Camper 780 / RV 780
  • Camper 795 / RV 795
  • CamperCam / RVcam 795 with camera
  • CamperVan caravan and motorhome sat nav
  • dēzl LGV500 / OTR500
  • dēzl LGV610 / OTR610
  • dēzl LGV700 / OTR700
  • dēzl LGV710 / OTR710
  • dēzlCam LGV710 / OTR710 with camera
  • Drive 53 & Live Traffic (Not compatible on North American devices)
  • Drive 55 & Live Traffic
  • DriveAssist 51 with camera
  • DriveLuxe 51
  • DriveCam 76 with camera
  • DriveSmart 7 EX / 51 / 55 / 55 EX / 61 / 65 / 65 with Amazon Alexa / 66 / 66 EX / 71 EX / 76 / 76 EX / 86
  • DriveTrack 71
  • Tread / Tread (Base Edition)
  • zūmo XT / XT2