GPSrChive eTrex - Function eTrex 10

Controls Button Operation Special Key Functions Main Menu

Function - eTrex 10

Controls



	A.	Power
	B.	Back
	C.	Up
	D.	Down
	E.	Menu
	F.	Thumb Stick (Enter)
	G.	GPS Antenna
	H.	Monochrome Display
	I.	Power/USB Data Port
	J.	Battery Cover
	K.	Lanyard Attachment

Button Operation

A. Power Button		D. Down Button
1. Press and hold to turn unit on/off.		1. Select page and menu options.
2. Press and release to cycle the display backlight on/off, then		2. Zoom In on the Map page.
move Thumb Stick (F) left or right to adjust display brightness,		E. Menu Button
move Thumb Stick (F) up or down to adjust display contrast.		1. Press and release to view option menu for active page.
B. Back Button		2. Press and release twice to view Main Menu.
1. Press and release to loop through display pages.		3. Press and hold to display the Where To? Menu.
2. Press and release to exit/quit a function.		F. Thumb Stick (Enter)
C. Up Button		1. Press and release to confirm data entry or menu selections.
1. Select page and menu options.		2. Press and hold to activate Mark Waypoint page.
2. Zoom Out on the Map page.		3. Move up, down, right or left to navigate menu selections or pan map arrow.

Special Key Functions

hold [Menu] + [Thumb Stick] + cycle [Power] = Master Reset (erases all user data)
[Power] + [Thumb Stick] = Diagnostic Screen (hardware information)

[Power] = Cycles Backlight 50% > 100% > Off
[Back] = Cycles Diagnostic Screens

Trip Computer > [Thumb Stick Up > Right > Down > Left] = Diagnostics

[Thumb Stick Up/Down] = Select Desired Shutdown Log

[Enter] = Displays additional information when available

[Thumb Stick Up > Right > Down > Left] = Logging Control
[Back] = Exit Selected Test Mode

Main Menu

Press and release the Back Button (B) to loop through display pages (as configured in Setup > Page Sequence).
The first page listed in the Page Sequence will appear by default each time the unit is powered on.
Pages not included in the Page Sequence are available from the Main Menu.

Move the Thumb Stick Button (F) to highlight the desired menu selection.
Press the Thumb Stick Button (F) to activate the highlighted menu selection.



	===		===		===		===		===		===