GPSrChive Rino 75x

Firmware - Rino 75x

Rino 75x GMRS+FRS Rino 75x GMRS

Firmware Installation

Garmin Express

Firmware updates, map updates, device backups and other optional software improvements for your Garmin Rino 75x can all be managed with the Garmin Express application. Versions for both PC and Mac are available in Software.

Connect the Garmin Rino 75x via USB and enter Mass Storage Mode.
Open the Garmin Express application and choose your device from the menu.
Select desired updates and follow the prompts as directed to complete available updates.

WebUpdater

The Garmin WebUpdater program can also find and install updates available for your Garmin Rino 75x. Versions for both PC and Mac are available in Software.

Connect the Garmin Rino 75x via USB and enter Mass Storage Mode
Drag and Drop the desired update file to the WebUpdater application, or
Run the WebUpdater application and select your device from the menu
Follow the prompts to keep your Rino 75x updated

Wireless Updates

When connected to the internet via an active Bluetooth connection, the Rino 75x will periodically check for (non beta) firmware updates and download them seamlessly in the background when available. Once the download has completed, the Rino 75x will prompt the user to install the firmware update at the next power-on event.

Rino 75x GMRS+FRS (2444) Firmware Update History

System Requirements:

IBM-compatible PC running Windows 2000 or later operating system and an available USB port.

Notes:

WARNING: If this software is uploaded to a device other than that for which it is designed, you will not be able to operate that device.
If attempts to upload software fail, you may need to return the device to Garmin for service.

Change History:

Changes made from version 5.10 to 5.30:

Garmin refuses to share any information - Do Not Update until a Change Log is published.

Changes made from version 4.90 to 5.10:

Fix potential shutdown when downloading geocaches from Geocaching Live.

Changes made from version 4.80 to 4.90:

Fixed possible shutdown when sending a Quick Text from inReach Remote.

Changes made from version 4.40 to 4.80:

Added support for the inReach Remote feature (Setup->Ant Sensor->inReach Remote). Requires an inReach capable device.
Improved wireless sharing between devices.
Improved geocache proximity alarms.
Fixed issue with calculating the remaining distance when navigating to a contact.
Fixed page flow when clearing the current activity.
Fixed issue with updating the value displayed from a cadence sensor.
Fixed issue with programming a Chirp.

Changes made from version 4.20 to 4.40:

Added support for the inReach Remote feature (Setup->Ant Sensor->inReach Remote). Requires an inReach capable device.
Improved wireless sharing between devices.
Improved geocache proximity alarms.
Fixed issue with calculating the remaining distance when navigating to a contact.
Fixed page flow when clearing the current activity.
Fixed issue with updating the value displayed from a cadence sensor..

Changes made from version 4.10 to 4.20:

Fixed incorrect timestamps when viewing elevation change over time.
Fixed potential page flow issue after saving activity.
Fixed possible display issue with notifications.
Fixed possible issue with navigating to contacts.
Fixed possible issue with radio transmissions while in BaseStation mode.
Fixed issue with scroll controls overlapping with other menu buttons in the geocache application.
Fixed issue where changes to Find menu item order would not persist.
Fixed issue with navigating to multicaches when geocaching.
Fixed issue with the north arrow when rotating the map between landscape and portrait mode.
Added support for displaying FIT activities on the map.
Added support for the additional waypoints part of a geocache to be downloaded via geocaching live.
Added geocache proximity alerts.
Improved Share Wirelessly functionality.
Improved the usability of the radio channel and code buttons.
CIQ security update.

Changes made from version 4.00 to 4.10:

CIQ security update.

Changes made from version 3.80 to 4.00:

Added support for G3 Marine Cartography.
Fixed possible issue with dashboard when adding main menu pages.
Fixed temperature spikes in track log when powering down when using a Tempe.
Fixed issue in-which Where To -> Coordinates was not able to be added to the main menu.
Fixed potential shutdown for area calculations when device is set to Greek.
Fixed possible issue with smart notifications not displaying.
Improved Connect IQ app support.

Changes made from version 3.70 to 3.80:

Added support for Connect IQ 3.0.
Fixed issue where some maps would not draw at high zoom levels.
Fixed issue with GPS indicator on status page.
Fixed issue where some highway and freeway map labels were being cut off.
Fixed issue where some devices wouldn't wake up when in battery save mode.
Fixed issue where elevation information could be missing from marked waypoint.
Fixed issue where edit/reverse of a route would only be available after a power cycle of the device.
Fixed issue with BaseStation mode prompt.
Fixed issue with weather radio frequency channels.
Fixed issue with updating of code label on radio dashboard.
Fixed issue on contact tracks page.
Fixed issue with contacts in BaseStation mode.

Changes made from version 3.40 to 3.70:

Added support for Garmin HuntView Plus.
Fixed possible shutdown with Chirp searching.
Fixed possible issue transferring Geocaches from Geocache Live.
Fixed possible issue with Share Wirelessly app.
Fixed possible issue where EPO data would not be downloaded through GCM.
Fixed possible issue with pairing an ANT sensor.

Changes made from version 3.30 to 3.40:

Fixed polling location when send location is disabled.
Fixed issue preventing routes created on device from being imported via BaseCamp.
Fixed issue where device would be muted after powering off while charging.

Changes made from version 3.20 to 3.30:

Added support for XERO laser locations.
Fixed issue with the wrong distance and bearing displayed for GPI lists.
Fixed various issues with routing.

Changes made from version 3.10 to 3.20:

Fixed possible issue with lock on roads setting being overwritten.

Changes made from version 3.00 to 3.10:

Added support for CIQ 2.4.
Improved the sound quality of tones by removing the popping sound.
Fixed possible shutdown on the photo viewer page.
Fixed issue with Project Waypoint from the Contacts Page after entering degrees.
Fixed issue where radio dashboard would not display correct value when repeater channel is used.
Fixed issue where channel value might display incorrectly on certain values.
Fixed issue where 3-digit temperature values were cut off on the weather page.
Fixed issue where altimeter could not be zoomed on a single axis.
Fixed issue where changing profiles quickly could corrupt settings.
Fixed issue where custom dash would not change after starting/stopping navigation.
Fixed issue where the keyboard could not use lower-case letters in activity mode.
Fixed issue where settings in advanced map would be overwritten if accessed from the map page.

Changes made from version 2.90 to 3.00:

Added support for Connect-IQ version 2.3.1.

Changes made from version 2.70 to 2.90:

Fixed possible issue that would prevent depleted batteries from charging.

Changes made from version 2.50 to 2.70:

Added support for Connect-IQ version 2.2.3.
Added vibrate toggle button on the volume page.
Added setting in Setup >Tones to mute the unit each time it powers up.
Improved notifications functionality. Notes and smart notifications can now be displayed simultaneously.
Improved volume controls so that volume can be changed while muted without unmuting.
Fixed issue where Round-Trip Routing review page would not populate with information.
Fixed issue where track manager would use the word 'track' instead of 'activity'.
Fixed issue where powered off pressure trending would not work.
Fixed issue where track portions were being saved incorrectly.
Fixed issue where a green bar would display over the weather radar page when the automotive dashboard was on.
Fixed issue where a geocache list deleted from geocaching.com would still show up on the device.
Fixed issue where Round-Trip distance could not be modified.
Fixed issue where swiping between multiple trip computer pages did not work.
Fixed issue where selecting direct routes with more than 50 waypoints did not work.
Fixed issue where the course line would always be drawn from the vehicle on the map.

Changes made from version 2.40 to 2.50:

Added pressure trending while off feature. See 'Pressure Trending' in Altimeter settings.
Fixed issue that could occur after 5 Watt radio transmissions.
Fixed various CIQ issues.

Changes made from version 2.30 to 2.40:

Added support for Connect IQ Apps and Widgets.
Added background download of geocache descriptions, hints, and logs for geocaching.com premium members.
Improved Geocache Lists experience by adding bookmark lists as well as fixing some issues.
Fixed fit file support for track logs with greater than 20,000 points.
Fixed possible issue reconnecting to speed and cadence sensors after a power cycle.
Fixed display issue after rotating on the notification page.
Fixed issue where live geocaches would overwrite geocaches loaded via .gpx file.
Fixed inconsistent data reporting for current tracks and saved tracks.
Fixed possible issues on the turn review page.

Changes made from version 2.20 to 2.30:

Improved radio data transmission in some cases.
Improved unit to unit file transfers.
Fixed issues with Connect IQ data fields.
Fixed issue with weather alert.
Fixed issue with calorie calculation when using heart rate monitor.

Changes made from version 2.10 to 2.20:

Improved radio performance.

Rino 75x GMRS (3187) Firmware Update History