Garmin T 5

Overview  Specifications Documents Firmware Updates OnSemi Updates Press Release
Overview
A top-mounted, high-sensitivity GPS/GLONASS receiver, T 5 dog device uses LED beacon lights activated from its compatible handheld device. The lights work in low-light conditions and at night, and are visible up to 100 yards away. Rugged and water-resistant to 10 meters, the tracking-only dog device with collar is tough enough to run wherever your dog runs, up to 9 miles away. T 5 ships with a 1-inch blue collar strap. Replacement straps are available in multiple colors (sold separately).
Specifications
Unit Dimensions	3.5" x 1.75” x 1.85" (8.9 x 4.4 x 4.7 cm)
Collar Size	Minimum of 9.5” (24 cm) in circumference x 1” (2.54 cm)
Weight	6.6 oz (188.0 g) for transmitter and antenna (without collar); 9.3 oz (265.0 g) total weight (with collar)
Battery Type	rechargeable lithium-ion pack; user replaceable
Battery Life	20 - 40 hours
Waterproof	1 ATM (10 meters)
High Sensitivity Receiver	Yes
GNSS	GPS + GLONASS
Range	9 miles
LED Beacon Lights	Yes
Rescue Mode	Yes
Frequency Mode	MURS
Documents
Garmin Astro 320 T 5 and T 5 Mini Owners Manual
Garmin Alpha 100 T 5 and T 5 Mini Owners Manual
Garmin Dog Collar Compatibility
Garmin Dog Collar Video Archive
Firmware Updates (2032)
Changes made from version 5.40 to 5.60: Bug fixes and improvements.
Changes made from version 5.30 to 5.40: Bug fixes and improvements.
Changes made from version 5.20 to 5.30: Fix bark sensitivity not updating.
Changes made from version 5.00 to 5.20: Bug fixes and improvements.
Changes made from version 4.70 to 5.00: Add improvements to pairing.
Changes made from version 4.50 to 4.70: Fix Rescue Mode not exiting when rate changes.
Changes made from version 4.30 to 4.50: Add support for new battery replacements.
Changes made from version 4.20 to 4.30: Fix no GPS fix issues.
Changes made from version 4.10 to 4.20: Restores update rate previous to low battery if rescue mode is enabled and low battery switches to 2 minute update rate. Added cancel to rescue mode if user issues a change update rate command. Improved behavior and timeout of pairing mode in high interference situations. Improved response to change-ID command.
Changes made from version 3.90 to 4.10: Adds support for new replacement battery pack.
Changes made from version 3.70 to 3.90: Improved randomization of default tracking settings when user clears non-volatile memory. Improved pairing timeout behavior.
Changes made from version 3.60 to 3.70: Improved tracking performance of France T5 and TT15 legacy units on channels 3-6.
Changes made from version 3.50 to 3.60: Fix tracking issue with New Zealand TT15 units.
Changes made from version 3.10 to 3.50: Prevent false occasional low-battery report from the collar. France only: Added channels 3-6 capability (see notes).
Changes made from version 3.00 to 3.10: Adds support for latest version of field-replaceable battery pack.
Changes made from version 2.50 to 3.00: Added HD BarkDetect for users in Norway, Sweden, Finland and Denmark. NOTE: Once a T5 or TT15 is updated to this version of software, and set to transmit HD BarkDetect information, it can only be tracked by Alpha 100's with version 5.40 or greater software. Improved reliability for pairing the collar to an Alpha.
Changes made from version 2.30 to 2.50: Added a new dog device tracking channel for Greece units. NOTE: the Alpha 100 must have at least version 4.40 software installed to support this new channel.
Changes made from version 2.00 to 2.30: Fixed Astro 320 pairing issue for devices that haven't yet had a GPS fix. Fixed issue with training tone.
OnSemi Updates (4173)
Changes made from version 6.00 to 6.10: Fix tracking and training.
Changes made from version 5.80 to 6.00: Bug fixes and improvements.
Changes made from version 5.40 to 5.80: Add improvements to pairing.
Changes made from version 4.50 to 5.40: Fix Rescue Mode not exiting when rate changes.