TranslationToday update of the CPE, impossible to have the satellites, I delete the CPE, I recharge it with Garmin Connect, it is well dated there today, but after a hour of acquisition no satellite.
It is time for Garmin to modify the firmware, we are really taken by fools, I read on Facebook Garmin forum that those who buy a 66sr do not understand this problem of acquiring satellites.
CPE.....
-
GPSrChive
- Site Admin
- Posts: 3921
- Joined: Fri Jan 20, 2017 11:29 pm
Re: CPE.....
Which firmware are you running?
-
ljnjtrails
- Posts: 46
- Joined: Tue Feb 01, 2022 9:05 pm
Re: CPE.....
I just tried it, CPE update via Garmin Explore, no problem after: satellites acquired fast, both bands and all 3 GNSS types. My GPSMAP 66sr is running firmware v5.20. After the sync, my CPE.BIN file is 323,316 bytes.
-
GPSrChive
- Site Admin
- Posts: 3921
- Joined: Fri Jan 20, 2017 11:29 pm
Re: CPE.....
Do not spend too much time on this, it will be corrected very soon. 
-
mimichris
- Posts: 438
- Joined: Sun Jan 13, 2019 7:59 am
Re: CPE.....
5.50, this morning CPE current and still no satellite. Garmin is ignoring us...
GPSMAP66sr, GPSMAP67, GPSII+, Twonav Cross.
-
ljnjtrails
- Posts: 46
- Joined: Tue Feb 01, 2022 9:05 pm
Re: CPE.....
Since you are using 5.50, did you try that work-around where you disable Multi-GNSS, that is go with GPS Only? When I had 5.50 this 'fixed' it, meaning it started to find satellites right away. Not ideal but at least it works, until the issue gets fixed.
-
mimichris
- Posts: 438
- Joined: Sun Jan 13, 2019 7:59 am
Re: CPE.....
This morning, update of the same CPE, nothing works in multi-band. If I put GPS Only, I actually have the GPS system, but the accuracy is not good.
GPSMAP66sr, GPSMAP67, GPSII+, Twonav Cross.