POI Display Issues [Bug 147]

Discussion related to the Garmin GPSMAP 66s/st GPSr
987
Posts: 317
Joined: Tue Apr 28, 2020 5:40 pm

POI Display Issues [Bug 147]

Unread post by 987 »

Hi again.
Another issue i see with 10.20 is problem displaying point of interest information properly for points on the map.
Self added POI-files works well.

On a map, even with the Garmin Topo map, select any point on the map (fuel station, train stop, etc).
Click on that point so that the info page opens.
Note here that the Text is centre aligned, instead of normal left aligned.
Note that the information ends with some ÿ character.
If you have a map with additional details on points, those details are not present.

Can anyone else see the same issue?
MikeD
Posts: 70
Joined: Thu Jun 15, 2017 12:54 pm

Re: POI Display Issues [Bug 147]

Unread post by MikeD »

Yes and really no
I am getting the second line centred, not sure what it was like before
I don’t get much else by way of information on the POI

I am in the Uk using topoactive Europe west 2021.20

It is on my 66st and Oregon 750t
I checked a POI in Louth , lincolnshire. A court

I attach screen prints for both
The centrering is the only difference
No difference in data or spurious characters

Mike

photos
0B20400A-0A32-4862-AF65-4D49AE34E86B.jpeg
E27A6E3E-3227-40AE-9ED4-714FFB331F2E.jpeg
You do not have the required permissions to view the files attached to this post.
Art
Posts: 83
Joined: Sat Nov 10, 2018 9:14 am

Re: POI Display Issues [Bug 147]

Unread post by Art »

Imagine if Garmin produced a smartphone with an OS and suite of Apps, where the GPS mapping was just a sideshow :D
987
Posts: 317
Joined: Tue Apr 28, 2020 5:40 pm

Re: POI Display Issues [Bug 147]

Unread post by 987 »

Hi.
Related to the missing details.
Here is a picture from 66st (10.20 FW) and one of the same petrol station on an etrex 32x (2.70 FW).
On the 66st the details are now missing (here fuel types, but other points may have opening hours, etc.)
66st
20220618_392_66st_1020_1.png
eTrex 32x
20220618_141_e32x_1.png
There is also an issue that local characters Å, å (A with top ring) are wrong or cut off.
66st
20220618_446_66st_1020_2.png
You do not have the required permissions to view the files attached to this post.
MikeD
Posts: 70
Joined: Thu Jun 15, 2017 12:54 pm

Re: POI Display Issues [Bug 147]

Unread post by MikeD »

Regarding truncated POI data and further to my earlier post, I checked other European countries, Eg France

The same truncation exists there as well ie a single headline on both 66 and 750
However if I look at the same mapset in Basecamp it will give full address and phone no. Both in Uk and France

As the 750 and 66 are acting alike my question is
“ is POI info purposely truncated on these hand helds?”

Or is it really a fault of recent iterations of the FW?

(However The comment on the Etrex experience is noted)
987
Posts: 317
Joined: Tue Apr 28, 2020 5:40 pm

Re: POI Display Issues [Bug 147]

Unread post by 987 »

MikeD wrote: Sat Jun 18, 2022 8:33 am As the 750 and 66 are acting alike my question is
“ is POI info purposely truncated on these hand helds?”

Or is it really a fault of recent iterations of the FW?
I would argue FW issue. In 9.90 firmware all details showed well.
(looked about the same as on the etrex 32x image)
luvvinbird
Posts: 126
Joined: Thu Jun 06, 2019 4:39 pm

Re: POI Display Issues [Bug 147]

Unread post by luvvinbird »

I have a 66s and a 66st and both have a purchased Garmin CN North America NT map card installed. All POI information is centered and does not have a lower case y with an umlaut. A second 66s I have has a free Openmapchest Canada map I downloaded to a card and it shows centered POI information but also shows the y with the umlaut. Conclusion: purchased Garmin maps = perfect POI info. Non Garmin maps = not so perfect POI info, lol. Anybody else agree?
User avatar
GPSrChive
Site Admin
Posts: 3882
Joined: Fri Jan 20, 2017 11:29 pm

Re: POI Display Issues [Bug 147]

Unread post by GPSrChive »

I would not fully agree.

We have been testing while taking special care to ensure only a single map is enabled at a time.

Thus far, I have found the Garmin City Navigator POI data is centered without extra characters, while OSM data may have extra characters, and is usually left justified.

TopoActive is a whole other story, as it combines OSM data and Garmin data, so seems to have a mix of both!

I do not recall POI data being 'centered' in the past, so not sure if this is something new, or it's just me.

I suspect this is a software issue with how the device reads and compiles POI data before displaying it.
987
Posts: 317
Joined: Tue Apr 28, 2020 5:40 pm

Re: POI Display Issues [Bug 147]

Unread post by 987 »

I went back to 9.90 firmware. all information is now back on the points.
Hence again i think it is a firmware issue.

It is hard to make exact comparison between Garmin topo active (which i have on the device) maps and other OSM based maps, as the Garmin maps usually contain less information on each point. Some of the "self-made" or popular OSM based maps contain more data for each point.
luvvinbird
Posts: 126
Joined: Thu Jun 06, 2019 4:39 pm

Re: POI Display Issues [Bug 147]

Unread post by luvvinbird »

987 wrote: Sun Jun 19, 2022 7:04 am I went back to 9.90 firmware. all information is now back on the points.
Hence again i think it is a firmware issue.

It is hard to make exact comparison between Garmin topo active (which i have on the device) maps and other OSM based maps, as the Garmin maps usually contain less information on each point. Some of the "self-made" or popular OSM based maps contain more data for each point.
If it is a firmware issue then Garmin will likely correct it. I think I'll wait rather than revert to an earlier version, too many settings to wade through.
Post Reply

Return to “GPSMAP 66s/st”