If use have TopoActive enabled and try to use the Round-Trip function, you will get with Automotive/Motorbike/ATV profile only "Route calculation error". This message is missleading, since routing is disabled by Garmin with such profiles on TopoActive.
If you are using a simple A->B route via Where To?, you get a normal speaking message, which explains, why it's not possible. This messsage should be also used in Round-Trip function, instead of that short error message.
Round-Trip function uses wrong error text with TopoActive
-
- Posts: 949
- Joined: Sat Jan 16, 2021 4:08 pm
Round-Trip function uses wrong error text with TopoActive
You do not have the required permissions to view the files attached to this post.
Garmin DriveSmart 86 MT-D (FW 6.80, HW V8, GPS 9.00.50, 32GB SD)
Garmin Montana 750i (FW 19.00, HW V6, GPS 2.90, Touchscreen 85.07, 64GB SD)
Garmin Montana 750i (FW 19.00, HW V6, GPS 2.90, Touchscreen 85.07, 64GB SD)
- GPSrChive
- Site Admin
- Posts: 3921
- Joined: Fri Jan 20, 2017 11:29 pm
Re: Round-Trip function uses wrong error text with TopoActive
Very astute observation, we have made sure the Garmin software engineers will see it after returning from the winter holiday.
Thank You!
Thank You!
-
- Posts: 949
- Joined: Sat Jan 16, 2021 4:08 pm
Re: Round-Trip function uses wrong error text with TopoActive
Still an issue with firmware 10.90.
Garmin DriveSmart 86 MT-D (FW 6.80, HW V8, GPS 9.00.50, 32GB SD)
Garmin Montana 750i (FW 19.00, HW V6, GPS 2.90, Touchscreen 85.07, 64GB SD)
Garmin Montana 750i (FW 19.00, HW V6, GPS 2.90, Touchscreen 85.07, 64GB SD)
-
- Posts: 949
- Joined: Sat Jan 16, 2021 4:08 pm
Re: Round-Trip function uses wrong error text with TopoActive
Seems fixed with 13.10.
Garmin DriveSmart 86 MT-D (FW 6.80, HW V8, GPS 9.00.50, 32GB SD)
Garmin Montana 750i (FW 19.00, HW V6, GPS 2.90, Touchscreen 85.07, 64GB SD)
Garmin Montana 750i (FW 19.00, HW V6, GPS 2.90, Touchscreen 85.07, 64GB SD)