Route Point symbols are not displayed on Map [Bug 71]

Discussion related to the Garmin Montana 7x0 series GPSr
ConiKost
Posts: 947
Joined: Sat Jan 16, 2021 4:08 pm

Re: Route Point symbols are not displayed on Map [Bug 71]

Unread post by ConiKost »

Wow. I am really surprised. They changed it with 10.80! Blue Pin symbols are back and indicate, which waypoints belong to active route.
Garmin DriveSmart 86 MT-D (FW 6.80, HW V8, GPS 9.00.50, 32GB SD)
Garmin Montana 750i (FW 19.00, HW V6, GPS 2.90, Touchscreen 85.07, ​64GB SD)
ConiKost
Posts: 947
Joined: Sat Jan 16, 2021 4:08 pm

Re: Route Point symbols are not displayed on Map [Bug 71]

Unread post by ConiKost »

A small notice. When not using a route, but a simple A->B route via Where To? and adding afterwards a via point, the blue pin needle is missing and this small square is again being used.
Garmin DriveSmart 86 MT-D (FW 6.80, HW V8, GPS 9.00.50, 32GB SD)
Garmin Montana 750i (FW 19.00, HW V6, GPS 2.90, Touchscreen 85.07, ​64GB SD)
ConiKost
Posts: 947
Joined: Sat Jan 16, 2021 4:08 pm

Re: Route Point symbols are not displayed on Map [Bug 71]

Unread post by ConiKost »

ConiKost wrote: Wed Dec 22, 2021 12:36 am A small notice. When not using a route, but a simple A->B route via Where To? and adding afterwards a via point, the blue pin needle is missing and this small square is again being used.
This is still the case in firmware 10.90.
Garmin DriveSmart 86 MT-D (FW 6.80, HW V8, GPS 9.00.50, 32GB SD)
Garmin Montana 750i (FW 19.00, HW V6, GPS 2.90, Touchscreen 85.07, ​64GB SD)
ConiKost
Posts: 947
Joined: Sat Jan 16, 2021 4:08 pm

Re: Route Point symbols are not displayed on Map [Bug 71]

Unread post by ConiKost »

Not changed in 13.10.
Garmin DriveSmart 86 MT-D (FW 6.80, HW V8, GPS 9.00.50, 32GB SD)
Garmin Montana 750i (FW 19.00, HW V6, GPS 2.90, Touchscreen 85.07, ​64GB SD)
ConiKost
Posts: 947
Joined: Sat Jan 16, 2021 4:08 pm

Re: Route Point symbols are not displayed on Map [Bug 71]

Unread post by ConiKost »

ConiKost wrote: Wed Dec 22, 2021 12:36 am A small notice. When not using a route, but a simple A->B route via Where To? and adding afterwards a via point, the blue pin needle is missing and this small square is again being used.
There is a change in 14.80, which makes it worse. Simple A->B routes now also don't have any blue needle anymore. Its gone, while pre-planed routes still have it. Can anyone confirm this?
Garmin DriveSmart 86 MT-D (FW 6.80, HW V8, GPS 9.00.50, 32GB SD)
Garmin Montana 750i (FW 19.00, HW V6, GPS 2.90, Touchscreen 85.07, ​64GB SD)
ConiKost
Posts: 947
Joined: Sat Jan 16, 2021 4:08 pm

Re: Route Point symbols are not displayed on Map [Bug 71]

Unread post by ConiKost »

ConiKost wrote: Wed Nov 09, 2022 7:42 pm
ConiKost wrote: Wed Dec 22, 2021 12:36 am A small notice. When not using a route, but a simple A->B route via Where To? and adding afterwards a via point, the blue pin needle is missing and this small square is again being used.
There is a change in 14.80, which makes it worse. Simple A->B routes now also don't have any blue needle anymore. Its gone, while pre-planed routes still have it. Can anyone confirm this?
This issue still exists for me in 15.00, 15.10, 15.20 and 16.50 :-( Really annoying, as an added via point is now hard to see.
Garmin DriveSmart 86 MT-D (FW 6.80, HW V8, GPS 9.00.50, 32GB SD)
Garmin Montana 750i (FW 19.00, HW V6, GPS 2.90, Touchscreen 85.07, ​64GB SD)
Post Reply

Return to “Montana 7x0”