Oregon 650 Battery level bars

Discussion related to the Garmin Oregon 6x0 series GPSr
Post Reply
vlascot
Posts: 13
Joined: Wed Jul 05, 2017 12:16 am

Oregon 650 Battery level bars

Unread post by vlascot »

Hi there
I have an Oregon 650. When battery is fully charged it displays 4 bars.
However within 15 minutes drops back to 2 bars.
I have tried 2 genuine Garmin battery packs, and one set of eneloop 1900 mAh with the same result.
Cannot get more than 3.5-4 hrs usage out of fully charged batteries.
I have timed out screen, battery save etc with no result.
Is there a way to calibrate the battery.
Any help will be appreciated
Cheers
User avatar
GPSrChive
Site Admin
Posts: 3882
Joined: Fri Jan 20, 2017 11:29 pm

Re: Oregon 650 Battery level bars

Unread post by GPSrChive »

Are you still having this issue, two years later?
vlascot
Posts: 13
Joined: Wed Jul 05, 2017 12:16 am

Re: Oregon 650 Battery level bars

Unread post by vlascot »

Yes. Almost 3 years later still having the problem with battery bars.
Cheers!
User avatar
GPSrChive
Site Admin
Posts: 3882
Joined: Fri Jan 20, 2017 11:29 pm

Re: Oregon 650 Battery level bars

Unread post by GPSrChive »

I am curious.

With the Garmin battery pack, the battery type setting is autoconfigured (you can not edit), but with any other non-Garmin battery installed, you must configure the battery type in Setup > System > Battery Type. When you are not using the Eneloops (model number, please), which battery type do you have configured?

Can you test also with a new set of Amazon Basics 2400 mAh NiMH batteries and Setup > System > Battery Type = Precharged NiMH.
vlascot
Posts: 13
Joined: Wed Jul 05, 2017 12:16 am

Re: Oregon 650 Battery level bars

Unread post by vlascot »

Hi Curious
Thanks for your reply. The batteries I'm using now are Eneloop Pro made by Panasonic Mod BK-3HCCE 2450ma Rechargeable NiMH. I have set the battery settings on my Garmin to Rechargeable NimH.
I still get about 4 hours of usage.
Regards
Vlascot
User avatar
GPSrChive
Site Admin
Posts: 3882
Joined: Fri Jan 20, 2017 11:29 pm

Re: Oregon 650 Battery level bars

Unread post by GPSrChive »

Can you send us a copy (webmaster@gpsrchive.com) of your Oregon 6x0/Garmin/Profiles/ directory for testing?

Which profile are you using now that only gets 4 hrs run time?
User avatar
GPSrChive
Site Admin
Posts: 3882
Joined: Fri Jan 20, 2017 11:29 pm

Re: Oregon 650 Battery level bars

Unread post by GPSrChive »

After testing your profiles and inspecting settings, we find the Screen Backlight is set to 100% brightness and the Display Timeout is set to 'Always On'.

If you look at the GPSrChive > Oregon 6x0 > Operation > Power Sources > Power Consumption, you will see that the backlight is a big energy consumer.

With your profile loaded on my Oregon 650, I experienced similar behavior of only a few short hours battery life, After recharging my batteries and changing only the display backlight to a much lower level and the timeout to 15 seconds, the battery life was greatly increased.
vlascot
Posts: 13
Joined: Wed Jul 05, 2017 12:16 am

Re: Oregon 650 Battery level bars

Unread post by vlascot »

Hi
Thanks for your reply.
I have decreased the brightness to about 50% just visible.
As well display time out to 15seconds.
Tested unit and battery life was increased to about 5hrs.
I suppose that's what it is.
Thanks
User avatar
GPSrChive
Site Admin
Posts: 3882
Joined: Fri Jan 20, 2017 11:29 pm

Re: Oregon 650 Battery level bars

Unread post by GPSrChive »

Why do you require so much screen brightness? These units are very bright in outdoor sunlight with the screen at 0% brightness.
Post Reply

Return to “Oregon 6x0”