GPSMAP 66 Firmware 7.60

Discussion related to the Garmin GPSMAP 66s/st GPSr
User avatar
GPSrChive
Site Admin
Posts: 3881
Joined: Fri Jan 20, 2017 11:29 pm

GPSMAP 66 Firmware 7.60

Unread post by GPSrChive »

GPSMAP 66 Firmware Update 7.60 released 25JUN21:

Changes made from version 7.20 to 7.60:

GPSMAP 66 B3028 760 Change Log.png

This update is being released in stages via Garmin Express, and should be available to everyone soon.

Please report your observations here!
You do not have the required permissions to view the files attached to this post.
asprin624
Posts: 143
Joined: Sun Dec 29, 2019 11:34 am
Location: Belgium

Re: GPSMAP 66 Firmware 7.60

Unread post by asprin624 »

Info from Garmin Express:
2021-06-29_11-08-47.png
You do not have the required permissions to view the files attached to this post.
fulbrich
Posts: 22
Joined: Sun Feb 16, 2020 4:59 pm
Location: Germany

Re: GPSMAP 66 Firmware 7.60

Unread post by fulbrich »

-- Greetings from Germany --
THE_Chris
Posts: 3
Joined: Fri Jul 02, 2021 7:44 pm

Re: GPSMAP 66 Firmware 7.60

Unread post by THE_Chris »

Right, I'll bite with this one.

v7.60 bricks my GPSMap 66s. Thank goodness for this website, or I'd be snookered. It installed last night and the GPS wouldn't get past the screen where it says GPSMap66s in the bottom of the screen.

I left it a full hour this morning to see if it would go any further, as I have another bug where 9,000 caches and 1,500 waypoints and a new map can take a very long time to start up (think 30 minutes to an hour). But it wasn't the same issue.

Forcing it into Mass Storage mode worked, and I deleted maps, waypoints and geocache files. None of it worked.

Thanks to the guide here I did a forced RGN install of v7.20 and it starts up again perfectly.

Although I did manage to lose my profiles somewhere in the muddle, I'm glad to have it back again. So I sure won't be risking a software update until a new version comes out!
asprin624
Posts: 143
Joined: Sun Dec 29, 2019 11:34 am
Location: Belgium

Re: GPSMAP 66 Firmware 7.60

Unread post by asprin624 »

When updating from 7.20 to 7.60 all went very quick.
Garmin Express version 7.7.0.0
As there are only 150 Geocaches on the 66 at any one time. Plus any maps and GPX files are on the SD card not on the 66 memory.
Have never run into any problems when it comes to software updates.
Only use approved Garmin cables and only use the STD USB port not the high speed USB port to do all my updates.
The 66 boots up in less than 1 min every time.
I do use high end SD cards and the Map is over 4GB.
Spiney
Posts: 65
Joined: Thu Apr 04, 2019 9:35 am

Re: GPSMAP 66 Firmware 7.60

Unread post by Spiney »

I also updated from 7.20 to 7.60 yesterday with Garmin Express 7.7.0 without any problems so far.

I have no Geocaches on my device but plenty of waypoints , Custom POIs and GPX tracks. The TopoActive Europe SW map is on the device and an assortment of IMG maps (all <4Gb) on the mSD card (also high end) - my device also boots up quickly in around 30 seconds.
User avatar
RaoulBE
Posts: 20
Joined: Sat Jan 26, 2019 2:09 pm

Re: GPSMAP 66 Firmware 7.60

Unread post by RaoulBE »

No problems with update to 7.60 on GPSMAP 66st, TopoActive Europe NE/SW and custom maps on SD card.
--- Raoul from The Netherlands, Quest 1, DriveLuxe 51 LMTS, GPSMAP66st, MS, BC, OSM, CNv9, City Navigator, TopoActive, OpenTopo, Topo NL, Topo BE, JaVaWa ---
garmingps
Posts: 3
Joined: Tue Dec 29, 2020 12:51 pm

Re: GPSMAP 66 Firmware 7.60

Unread post by garmingps »

No problems during installation update v7.60 and no problems so far when in use.

GPSMAP 66ST
francesco
Posts: 9
Joined: Thu Apr 11, 2019 8:57 pm

Re: GPSMAP 66 Firmware 7.60

Unread post by francesco »

I can confirm that the keyboard layout now defaults to the selected system language
987
Posts: 317
Joined: Tue Apr 28, 2020 5:40 pm

Re: GPSMAP 66 Firmware 7.60

Unread post by 987 »

francesco wrote: Tue Jul 06, 2021 5:45 pm I can confirm that the keyboard layout now defaults to the selected system language
I can also confirm this. But i would like to request Garmin (if you read this) to please change the settings to be as up to including firmware 6.00 where unit language and keyboard language were saved independently.
The reason for this is easy to explain, some examples.
An English speaking Canadian is in a French speaking area: unit language is English, keyboard language French.
An English speaking person is in a Hispanic area: unit language is English, keyboard language Spanish.
A German speaking person is in France: unit language is German, keyboard language French.
A Polish speaking person is in Germany: unit language is Polish, keyboard language German.
A person from a generation where computers were English only: unit language is English, keyboard language is any other.
etc. etc.
Post Reply

Return to “GPSMAP 66s/st”