GPSMAP 66 Firmware 3.40

Discussion related to the Garmin GPSMAP 66s/st GPSr
bonstetten
Posts: 78
Joined: Sun Oct 28, 2018 12:57 pm

Re: GPSMAP 66 Firmware 3.40

Unread post by bonstetten »

Voilà.
245.jpg
265.jpg
You do not have the required permissions to view the files attached to this post.
bonstetten
Posts: 78
Joined: Sun Oct 28, 2018 12:57 pm

Re: GPSMAP 66 Firmware 3.40

Unread post by bonstetten »

rogerm wrote: Sun Sep 29, 2019 4:34 pm ...For the record, I tried enabling battery save mode and disabling the compass and using a set of freshly changed Garmin batteries, my unit managed just over 19 hours based on the trip time the unit reports.
How do you disabled the compass? (Which menu?)
User avatar
GPSrChive
Site Admin
Posts: 3921
Joined: Fri Jan 20, 2017 11:29 pm

Re: GPSMAP 66 Firmware 3.40

Unread post by GPSrChive »

Disable Compass: Setup > Heading > Compass Mode > Off
User avatar
GPSrChive
Site Admin
Posts: 3921
Joined: Fri Jan 20, 2017 11:29 pm

Re: GPSMAP 66 Firmware 3.40

Unread post by GPSrChive »

bonstetten wrote: Sun Sep 29, 2019 1:10 pm The new map-menu entry "Hide Dashboard" ist not translated (tested in german and french).

Translation seems not be on the checklist for new firmware-releases :D
Now listed in GPSrChive > GPSMAP 66 > Common Issues > Bug 69

Can you also test menu language while navigating to a geocache (Log Attempt, Geocache)?

Thank You!
bonstetten
Posts: 78
Joined: Sun Oct 28, 2018 12:57 pm

Re: GPSMAP 66 Firmware 3.40

Unread post by bonstetten »

gpsrchive wrote: Sun Sep 29, 2019 8:47 pm Can you also test menu language while navigating to a geocache (Log Attempt, Geocache)?
I only see "Log Geocache" and "Geocache filter". This are translated --> ok

But: What I miss is a menu entry "Geocache Description / hint". this would for me more important than "Geocache filter" (when you are navigating to a geocache you do not need longer the filter.
bonstetten
Posts: 78
Joined: Sun Oct 28, 2018 12:57 pm

Re: GPSMAP 66 Firmware 3.40

Unread post by bonstetten »

What is meant with "... issues with MOB key" ? Can I assign the MOB-function to a key?
User avatar
GPSrChive
Site Admin
Posts: 3921
Joined: Fri Jan 20, 2017 11:29 pm

Re: GPSMAP 66 Firmware 3.40

Unread post by GPSrChive »

bonstetten wrote: Sat Oct 05, 2019 12:58 pm What is meant with "... issues with MOB key" ? Can I assign the MOB-function to a key?
No, but pressing and holding (Find) results in a MOB marked and begins navigation to the waypoint.
g66
Posts: 135
Joined: Wed Jul 03, 2019 1:48 pm

Re: GPSMAP 66 Firmware 3.40

Unread post by g66 »

MOB is already designed to a key per default - HOLD FIND-key for a longer time

Man OverBoard (MOB)The Man Overboard (MOB) feature isanother methodfor creating a waypoint.
(Typically, an application formarking a location on water where you cannot stopquickly and must return to a point where there are nolandmarks for reference.)
To create a waypoint using the MOBfeature:
1. Press and hold the FIND key.
2. Press ENTER to open the Map Page showingthe path from your current location to the MOBpoint.
Use the Compass Page for additionalguidance to the MOB point
Post Reply

Return to “GPSMAP 66s/st”