TranslationRaoul,
I discovered this fault only occurs when you are switching to a profile where the routing method has been selected to "Prompted". If it has been set to "minimize time/distance" etc, all is good.
Does this agree with your findings?
Also, what maps have you got loaded ? Garmin ones ?
Routing method does not change when switching profiles [Bug 52]
-
steerage250
- Posts: 98
- Joined: Fri Jan 04, 2019 2:48 am
-
RaoulBE
- Posts: 20
- Joined: Sat Jan 26, 2019 2:09 pm
Re: Routing method does not change when switching profiles [Bug 52]
Hi steerage250,
I can confirm this! If I select minimize time/distance by default, the routing method changes correctly when switching between profiles. Thanks for sharing your observation!
I use the Garmin Top maps NE / SW Europe, as installed by default on the st version of the GPSMAP66. I also have OSM maps installed of Belgium / Netherlands / Germany (from http://garmin.openstreetmap.nl/) on the SD-card. As far as I can see, the routing problem is not dependent on the maps used.
I can confirm this! If I select minimize time/distance by default, the routing method changes correctly when switching between profiles. Thanks for sharing your observation!
I use the Garmin Top maps NE / SW Europe, as installed by default on the st version of the GPSMAP66. I also have OSM maps installed of Belgium / Netherlands / Germany (from http://garmin.openstreetmap.nl/) on the SD-card. As far as I can see, the routing problem is not dependent on the maps used.
--- Raoul from The Netherlands, Quest 1, DriveLuxe 51 LMTS, GPSMAP66st, MS, BC, OSM, CNv9, City Navigator, TopoActive, OpenTopo, Topo NL, Topo BE, JaVaWa ---