Oregon 7x0 Firmware 3.35 BETA

Discussion related to the Garmin Oregon 7x0 series GPSr
User avatar
GPSrChive
Site Admin
Posts: 3882
Joined: Fri Jan 20, 2017 11:29 pm

Oregon 7x0 Firmware 3.35 BETA

Unread post by GPSrChive »

Now available from the Firmware Page!

Please post comments and observations here!
MikeD
Posts: 70
Joined: Thu Jun 15, 2017 12:54 pm

Re: Oregon 7x0 Firmware 3.35 BETA

Unread post by MikeD »

tried to load several times today,
nothing!
renamed and loaded as instructed, no update and gps booted
went to folder garmin via PC update file gone
tried 4 times
is it me or the update file?
MikeD
Posts: 70
Joined: Thu Jun 15, 2017 12:54 pm

Re: Oregon 7x0 Firmware 3.35 BETA

Unread post by MikeD »

I have tried several times to load this update
Have done it before with 3.33
Load the update as instructed
Device boots up, no update
Check unit files, update file is gone
Tried several times
Is it me or the update file? Any suggestions please?
MikeD
Posts: 70
Joined: Thu Jun 15, 2017 12:54 pm

Re: Oregon 7x0 Firmware 3.35 BETA

Unread post by MikeD »

This is an update on my updating!

I went to the Garmin beta site and downloaded direct from there.

http://www.garmin.com/support/download_ ... p?id=11083

Interesting thing. No need to rename the new file once unzipped and there is a 3.33 roll bank gcd there ready.
Also
I loaded The file and rebooted but the normal update screen did not appear
Failed again I thought but
Went to "About" and it is version 3.35
Very odd
User avatar
GPSrChive
Site Admin
Posts: 3882
Joined: Fri Jan 20, 2017 11:29 pm

Re: Oregon 7x0 Firmware 3.35 BETA

Unread post by GPSrChive »

Based on your posts, it sounds like the first time actually installed the 3.35 beta and each subsequent attempt simply deleted the gupdate.gcd as you were already at 3.35.

Initially, Garmin mistakenly had the beta update page without any download link, instead directing users to use Garmin Express, which never actually installs beta releases. Glad they got that sorted out!

Glad you are up and running!
MikeD
Posts: 70
Joined: Thu Jun 15, 2017 12:54 pm

Re: Oregon 7x0 Firmware 3.35 BETA

Unread post by MikeD »

Thanks. It is very strange
I am absolutly sure that it didn't go through the normal update cycle where it shows a message on the opening screen followed by the blue line crossing , then a reboot.
Anyway will test it all this week
Thanks again
User avatar
EddyG
Posts: 14
Joined: Sat Feb 18, 2017 8:07 am
Location: Rhenen

Re: Oregon 7x0 Firmware 3.35 BETA

Unread post by EddyG »

3.35 is not a good beta. In the Geocache environment had several freezes and crashes.
Did send those remarks to the Garmin beta team.
Eddy

Forerunner 305, Edge 305, Colorado 300, Oregon 450, GPSmap 62s, Montana 650, Oregon 600, Oregon 750t
MikeD
Posts: 70
Joined: Thu Jun 15, 2017 12:54 pm

Re: Oregon 7x0 Firmware 3.35 BETA

Unread post by MikeD »

I agree
Had one crash, trouble is I am 6000 miles from home with no pc. All GC LOADED up for 3 weeks in south africa
Fingers crossed
MikeD
Posts: 70
Joined: Thu Jun 15, 2017 12:54 pm

Re: Oregon 7x0 Firmware 3.35 BETA

Unread post by MikeD »

Given up with 3.35 and reverted to 3.30 although 3.33 was ok
Shame I had to reset all my settings
Froze several times when trying to hit GO, when selecting a GC to route to
Then it crashes.
Repeated several times then was ok again
Had the ghost type image on crashing as if the power has gone and it was running on empty

Have reported it
MikeD
Posts: 70
Joined: Thu Jun 15, 2017 12:54 pm

Re: Oregon 7x0 Firmware 3.35 BETA

Unread post by MikeD »

I REPORTED the problems and have just had this reply

"Thank you for your report. It in fact assisted us in discovering what the issue was that lead to these lock-up concerns. We did release public software 3.40 today. Please load this software and let us know if you observe any additional concerns.

Outdoor Software Quality"

I cannot however find a link to the new version
Any suggestions please?
Post Reply

Return to “Oregon 7x0”